Types of Current Instrument Transformer Single Phase Transformers

• Customization: Available
• Application: Electronic, Instrument, Position Sensor, Audio, Lighting
• Type: Current Transformer
• Model NO.: Lzzb9-10
• Operation Condition: Indoor
• Usage: Protection, Measurement
• Winding Form: Single Layer & Tightly Wound Type
• Insulating Medium: Epoxy Resin
• Installation: Strut Type
• Magnetic Circuit Structure: Single Stage Type
• Voltage Transformation Principle: Electromagnetic Type
• Materials: Epoxy Resin
• PMP: Insulation
• Copper: Input Current
• Silicon Steel Sheet: Protection
• Ambient Temperature: -20-80
• Output Voltage: 110V
• Frequency: 50/60 Hz
• Input Voltage: 6kv, 10kv
• Rated Capacity: 10-35kv
• Transport Package: Wooden Box
• Specification: Copper Epoxy resin
• Trademark: xianghu
• Origin: Zhejiang, China
• HS Code: 8504311000
• Production Capacity: 5000 Units/Month
• Package Size: 37.00cm * 17.50cm * 29.00cm
• Package Gross Weight: 22.000kg

Product Description

Product Description

LZZBJ9-10 current transformer is epoxy resin vacuum casting pillar structure, suitable for rated frequency 50HZ, rated voltage 10KV and below power lines and equipment for current, electric energy measurement and relay protection.

Conditions of Use
1. Place of use: indoors.
2. Ambient temperature: -5ºC~+40ºC, the daily average temperature does not exceed +30ºC.
3. Altitude: no more than 1000m;
4. Atmospheric conditions: In a place where there is no explosion, no violent vibration, and no dust or vapor that can corrode metals and damage insulation.

Structural features
LZZBJ9-10 type current transformer is composed of epoxy resin, and the iron core is made of high-quality magnetic material. The primary and secondary windings and iron cores are poured in epoxy resin, and the surface of the product is not sprayed. It has excellent insulation and moisture-proof performance, and the surface is easy to clean. The primary outlet is on the top of the pouring body, and the outlets are marked as P1 and P2. The first secondary winding is the measurement level outlet and the outlet is marked as 1S1, 1S2; the second secondary outlet is marked as the protection level, and the outlet is marked 2S1, 2S2. Transformers are connected in minus polarity. There are ground bolts and four mounting holes on the base.

Detailed Photos

Description:

LZZBJ9-10 type current transformer is epoxy resin cast strut conditions indoors.For protection or energy measurement of the power system with rated frequency 50Hz rated voltage of 10kV and below, which LZZBJ9-10A installed in the center switchgear on other types of switchgear.The current transformer is the pillar structure, the use of epoxy pouring full-closed, resistant to pollution and humid, but also suitable for tropical regions. The transformer does not require special maintenance,just on a regular basis to remove surface dirt. Completely closed due to current transformer with epoxy resin casting. Small size, quality. Suitable for any location, and installed in any direction.

Customized products can consult online customer service!

 

 

 

 

Product Parameters

Information Required for Order PlacingModel.
Rated current ratio A.
Combined accuracy classes and Rated output VA.
Altitude m.

Model	Rated primary current (A)	Accuracy level combination	Rated output (VA)					Rated dynamic stabilization current(kA)	Rated short-time thermal current(kA/s
			0.2(A)	0.5(A)	0P10P	10PI5P	10P20P
LZZBJ9-10	5	0.2(S)/0.2(S)/10P10 0.2(S)/0.5(S)/10P10 0.2(S)0.2(S)/10P10/10P10 0.2(S)/0.2(S)/10P15 0.2(S)/0.5(S)/10P15 0.2(S)/0.2IS)/1OP15/10P15 0.2(S)/0.2(S)/10P20 0.2(S)/0.5(S)/10P20 0.2(S)0.2(S)/10P20/10P20	10	10	30	20	15	0.5	1.25
	10							1	2.5
	15							1.5	3.75
	20							2	5
	30							3	7.5
	40							4	10
	50							5	12.5
	75							7.5	25
	100							10	25
	150							15	37.5
	200-600							63	130
	1200-2000			15	20	20	20	80	160
	2500-3000			20	30	30	30	100	160

When placing order, please provide the following technical parameters

1. kV rated voltage:

2. rated voltage;

3. Combination of three levels, accurate phase and accurate;

4, rated output, and the corresponding accurate level (VA).

Company Profile

 

      Zhejiang Xianghu Technology Co., Ltd.is a company specializing in the production of high and low voltage switch power transmission and distribution equipment and high, low voltage electrical components, one of the professional production enterprises, the production of all fully insulated and fully sealed inflatable cabinet, intelligent solid insulation ring main unit, outdoor high voltage cable branch box, box-type substation, etc. Product quality is stable, reliable, It is deeply trusted and approved by the customers. 

       Manufacturing of the main products are 10kv High tension Mutual inductor,10 kv transformer, YBW box-type substation, KYN61-40.5, KYN28A - 24, KYN28A - 12, XGN2-10, HXGN-10 high voltage switchgear, XGN ring net cabinet, SHSRM inflatable ring main unit, SHSG solid ring main unit, MNS, GCS, GCS, GGD, XL and other transmission and distribution equipment. 

        For a long time also for all kinds of metallurgy, shipbuilding, electric power, mining, and intelligent buildings, high-rise buildings, hospitals, schools and other industries to provide high quality power transmission and distribution of complete sets of equipment and electrical control equipment. The company has a strong technical force, sophisticated technology and sophisticated testing methods, and the products sell well across the country. Deeply appreciated and praised by the broad masses of users.

PRODUCT WORKSHOP

Certifications

 

Packaging & Shipping

 

Contact Us

 

Q1: Are you a trading company or manufacturer ?

A1: We are a professional factory with 7 years experience in the field of high and low voltage power transformers, substation, vacuum circuit breaker, power equipment.

Q2: Do you accept customized serveice ?
A2: We offer OEM/ODM service , can print your logo on product . our professional technical and quotation team can provice a satisfied project according to your drawing and parameters .
 

A3: What is your MOQ?
A3: Our MOQ is 1 piece.
 

Q4: How long is your delivery lead time ?
A4: It depends on your product requirement and quantity . Generally , 5~10 working days is avaliable .
 

Q5: How do you solve quality problems?
A5: Please porvide detailed photoes of quality problems. our technical and quality testing department will analyse.we will make asatisfied soluton within 2 days .

 

Q6: What is the price of shipping?
A6: Depending upon the port of delivery, prices varies.

Q7: What is your payment terms ?
A7: 30%T/T in adcance,70% before shipment . West union , L/C are also acceptable .