Sc10-63/35-0.4kv 400/500/600/630/1500/3 Phase Cast Resin Dry Transformer/Energy-Saving Dry Power Transformer

• Customization: Available
• Application: Power, Electronic, Instrument, Lighting, Rectifier, Audio
• Phase: Three
• Model NO.: SCB10-35KV
• Cooling Method: Dry-type Transformer
• Winding Type: Auto-transformer
• Certification: ISO9001-2000, ISO9001, CCC, CE
• Usage: Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: Ring
• Coil Number: Autotransformer
• Type: Oil-Immersed
• Coil Structure: Toroidal
• Rated Capacity: 30kVA~2500kVA
• Winding Material: Copper/Aluminium
• Frequency: 50Hz/60Hz
• Transport Package: Wooden Case
• Specification: 1100*950*1150mm
• Trademark: xianghu
• Origin: Zhejiang, China
• HS Code: 8504231200
• Production Capacity: 200 Piece/Pieces Per Month
• Package Size: 660.00cm * 450.00cm * 640.00cm
• Package Gross Weight: 680.000kg

Product Description

Product Description

 

 

The technical parameters of the form are for reference only.

Customized products can consult online customer service!

Model Number	SCB10
Supplier Type	power electrical
Package / Case	customized
Certification	CQC

This product has a wide range of using territory ,it's suitable for places with high fire protection requirements,like mines, oil
field ,subway,power station,schools ,hospitals,business centers ,high-rise buildings and all indoor equipped systems.

Operation condition

1.Installation heightat an average altitude of 1000m above sea level

2.The waveform of the supply voltage is similar to that of a sine wave;

3.The symmetry of multi-phase supply voltage: The power supply voltage connected to the poly-phase transformer should be approximately symmetrical;

4.Ambient temperature:

The maximum air temperature:+40the maximum daily average air temperature +30;the maximum annual average air temperature +20 ; The minimum air temperature -30(It 's suitable for indoor type transformers)

Architectural feature

1.Iron Core

The iron core is made of high permeability and high-quality grain orientation cold-bound silicon steel sheet with 45° fully inclined stepping joints. The iron core is made of special square tube pull-plate structure, the core column is bound with insulation tape, and the surface of the iron core is coated with special resin to prevent moisture and rust, which effectively reduces no-load loss, no-load current and noise of the iron core.

Safe, inflammable, fireproof, no pollution, can be directly installed in the load center. Maintenance free, easy installation, low overall operation cost. Good moisture-proof performance, can operate normally under 100% humidity, after shutdown without pre-drying can be put into operation.Low loss, low local discharge power, low noise, heat dissipation ability, equipped with perfect temperature protection and control system, to provide reliable guarantee for the safe operation of the transformer.

Low loss, low local discharge power, low noise, heat dissipation ability, equipped with perfect temperature protection and control system, to provide reliable guarantee for the safe operation of the transformer.

2.Foil coil

The low-voltage winding is made of a whole section of copper foil, together with F grade turn insulation in a special low-voltage foil winding machine. Foil coil better solve the low voltage, large current coil winding product short circuit stress, safe Uneven turns, poor heat dissipation effect, there are winding spiral Angle, artificial welding quality is not stable prominent problems. At the same time our company winding end with resin potting, curing forming, moisture-proof and anti-fouling.

3.Temperature control device

The transformer adopts BWDK series signal thermometer, and the temperature measuring element is buried in the upper part of the low-voltage coil, which can automatically detect and display the working humidity of the three-phase coil. And has over - temperature alarm and trip function.

 

Detailed Photos

 

 

 

Product Parameters

 

 

 

When placing order, please provide the following technical parameters

1. kV rated voltage:

2. rated voltage;

3. Combination of three levels, accurate phase and accurate;

4, rated output, and the corresponding accurate level (VA).

Company Profile

 

     Zhejang Xianghu Technology Co., Ltd.is a company specializing in the production of high and low voltage switch power transmissionand distribution equipment and high, low voltage electrical components, one of the professional production enterprises, theproduction of all fuly insulated and fuly sealed inflatable cabinet,inteligent solid insulation ring main unit, outdoor high voltage cablebranch box, box-iype substation, etc. Product gualily is stable, reliable, it is deeply trusted and approved by the customers.
       
       Manufacturing of the main products are 10kv High tension Mutual inductor,10 kv transformer, YBW box-tvpe substation. KYN61-40.5KYN28A - 24, KYN28A - 12, XGN2-10, HXGN-10 high voltage switchgear, XGN ring net cabinet, SHSRM inflatable ring main unit.SHSG solid ring main unit, MNS, GcS, GcS, GGD, XL and other transmission and distribution equipment.
   
    For a long time also for all kinds of metallurgy, shipbulilding, electric power, mining, and inteligent buildings, high-rise buildings,hospitals, schools and other industries to provide high quality,power transmission and distribution of complete sets of eguipment andelectrical control equipment. The company has a strong technical force, sophisticatedtechnology and sophisticated testing methods,and the products sell well across the country, Deeply appreciated and praised by the broad masses of users.
 

PRODUCT WORKSHOP

Certifications

 

Packaging & Shipping

 

Contact Us

Q1: Are you a trading company or manufacturer ?

A1: We are a professional factory with 7 years experience in the field of high and low voltage power transformers, substation, vacuum circuit breaker, power equipment.

Q2: Do you accept customized serveice ?
A2: We offer OEM/ODM service , can print your logo on product . our professional technical and quotation team can provice a satisfied project according to your drawing and parameters .
 

A3: What is your MOQ?
A3: Our MOQ is 1 piece.
 

Q4: How long is your delivery lead time ?
A4: It depends on your product requirement and quantity . Generally , 5~10 working days is avaliable .
 

Q5: How do you solve quality problems?
A5: Please porvide detailed photoes of quality problems. our technical and quality testing department will analyse.we will make asatisfied soluton within 2 days .

 

Q6: What is the price of shipping?
A6: Depending upon the port of delivery, prices varies.

Q7: What is your payment terms ?
A7: 30%T/T in adcance,70% before shipment . West union , L/C are also acceptable .